Tw1
(Modelik)
The Tw1 (the Prussian G10) was a German goods train, steam locomotive. The model is printed digitally.
(Modelik)
The Tw1 (the Prussian G10) was a German goods train, steam locomotive. The model is printed digitally.
The model is printed digitally. This means that you can not use an adhesive with a solvent. So, before starting, it is recommended to carry out the test (eg. using the cover of the model).
Historical information
The Tw1 (the Prussian G10) was a German goods train, steam locomotive, whose design was based on a combination of the running and valve gear from the Prussian T 16 and the boiler from the Prussian P 8.
The G 10 was intended for heavy goods train duties on main lines, but as a result of its low axle load it could be employed more flexibly than its equally powerful cousin, the Prussian G 8.1. The G 10 was occasionally even used in passenger train service.
Between 1910 and 1924 no less than 2,615 Class G 10s were delivered to the Prussian state railways and the Deutsche Reichsbahn, 35 to the Imperial Railways in Alsace-Lorraine (see Alsace-Lorraine G 10) and 27 to the Saar Railway. Another 350 were sent to railway companies in Turkey, Romania, Poland and Lithuania.